Abu na Alkyd da ke bawa kariya ta yin gaskiya wanda ya dace da rarraba kariya ta yin gaskiya

Bayani

Makarantar Gare:	Jiangxi
Namun Sharhin:	Qianlang
Raiya Namar:	C53-36
Rubutu:	ISO900/ISO14001/ISO45001/CE
Kamfanin Duniya Mai Karfe:	500KG
Niyoyar Sai:	USD1.3-1.5
Tafiyar Bayani:	/
Watan Aikace:	30days

Bayanin

Karya mai kyau ga kula da tsanen zinzi

Karya mai kyau ga dakin yin hankali

Ya sauke ya gurza

Karya mai kyau ga aiki

Aiki

Yana da alaƙa wajen amfani shi ne kamar workshop primer a cikin pretreatment lines na shipyards, steel structure plants, da sauransu, kuma kamar anti-rust paint na mechanical equipment. Yana iya amfani da shi ta hanyar tashin da traditional topcoats kamar phenolic da alkyd.

Bayanan

Tattalin arziki na aikin gudunmawa

1. Yi sandblast ko shot blast a kan satali zuwa Sa2.5, da karamin gyara na 30-50µm.

2. Ga wasu substrates da suka cikin gurasa ta farko (ta hanyar daidai): Cire gurasa ta farko wanda ya dace ba da karama da rust, sannan yi polish don sa St3 tare da alatun pneumatic ko electric.

3. Ga wasu wurare da suka biyayi aiki na welding, flame cutting, ko correction na burnt: Yi polish don sa St3 tare da alatun pneumatic ko electric.

4. Hanyoyin aiki sun hada da brushing, roller coating, high-pressure airless spraying, da air spraying. Za a sanya gurasa a cikin karamin ruwa (ruwan da shirye shirye ta kompaniya) da za a yi mixing don sa karama ta 40–60µS. Sannan za a fiya ta 80–120 mesh sieve da a sanya a cikin karama.

5. Tafin da za a rufi shi yana bukatar kuwa da sauransu kuma ba ta dace ba don zama mai tsinkan, tsohuwa, kura, da sauransu.

6. A cikin wani lokaci na biyu da za a rufi shi, lokacin farko ya kamata suka gaba. Kuna bukatar kuwa da 24 gaba ga wani lokaci, kuma kamar yadda ya kamata suka gaba a cikin rufin da ke cikin karami ya kamata ya kasance 80µm ko ƙarshen.

7. Bayan rufin, duk wasu abubuwan da suka amfani da su yana bukatar kuwa da alkali don hana su zama mai tsinkan.

Ingantaccen:

1. A lokacin da za a sanya alkali, za a sanya su kamar yadda ya kamata suka gaba kuma a sanya su maki-maki.

2. Tsarin da ke cikin rufin ya kamata ya kasance 3°C don gaba ga tsarin da ke cikin tsohuwa, kuma tsarin da ke cikin tsohuwa ya kamata ba ya kara 80%. Ba za a rufi a lokacin da ke cikin ruwa ko da ke cikin barfi ba.

3. Ya dace da duk wasu rufin da ke cikin alkyd ko phenolic da ke cikin shirin mu.

4. Wannan abu ana kira shi a cikin 25kg x 1 karami irin da ke cikin karami.

Ayyukan ajiye da kudande:

Wani lokaci na ajiye na abun ya kashe 12 watan, a ajiye a wurin yara da fahimtar hanyar rufe, canjin ajiye: 5-30℃. A lokacin kariya, za a jaga canjin yara, rayuwa ta fadada, da yanki. Idan lokacin da aka bayyana ya kammala, zai iya amfani da test na bisa canjin teknikal na baya, idan canjin teknikal ya dace, zai iya amfani da ita kuma.

hankali:

Wani wani na kariya ya kamata yana da fasahin gaba daya, kuma mai tsanani ya kamata a yi amfani da kofin gida, kofin kaya, kofin fusu, da sauransu don rage tattara na gida da shirin tsanani. Karya ta hanyar nufi ana ban shi da karya.

bayani:

Bayanin ƙirar wannan abu suna daga tashin laboratari da kuma karfafa a matsayin yadda ake amfani da shi, domin fahimtar kuma ba su zama bayanin da suka tabbata. Aljumai na iya duba halin yadda ake amfani da shi don sauyi. Mu gina damar tsayayen kimiyya na wannan abu kuma mu nuna alama akan halin yadda ake amfani da shi, amma baza mu zama masu damar amsa ba. Mu da haƙuri don sauyin wannan shirin lokacin da muke sauyin abun da aka bayyana.