EN
Zinc - Mai Tsari Epoxy Primer
Shi ne kwayar biyu na komponentin da ke cika a yankin gida, wanda ya kasu resin na epoxy, zinki mai tsoro ga baya, additivu, da solvants, da agamai na kwaya.
- Bayani
- Bayanin
- Aiki
- Bayanan
- Tattalin arziki na aikin gudunmawa
- Kayan da aka ba da shawara
Bayani
| Makarantar Gare: | Jiangxi |
| Namun Sharhin: | Qianlang |
| Raiya Namar: | H06-3 |
| Rubutu: | ISO900/ISO14001/ISO45001/CE |
| Kamfanin Duniya Mai Karfe: | 500KG |
| Niyoyar Sai: | USD3.0-3.2 |
| Tafiyar Bayani: | / |
| Watan Aikace: | 30days |
Bayanin
Yana da kyau ƙarfi na kula da tsananni da dukkan abubuwan da suka hada da jiki da kula da tsananni; zai iya amfani da shi tare da epoxy, rubber, acrylic, polyurethane da sauran topcoats.
Aiki
Zai iya amfani da shi don bincike na tsanani a cikin da a waje na kofa, kayayyaki, kofa na dandamai, al'adu na gida, tsumbun na yaki, da kofa na saukin yaki.
Bayanan
| Nombarnin ajiye | Test item | Shakara na Al'ada | |
| 1 | Ranar da dabbobi na film | Gurara, ba da karami | |
| 2 | Waktu na saukawa (23±2℃) h | Yawan Rana don Ƙarɓon Ƙarƙashin Gidan | ≤1 |
| Kullum waktu na yin gaba | ≤24 | ||
| 3 | Abu mai tsoro, % | ≥70 | |
| 4 | Karamin gudun yin damar, cm | ≥50 | |
| 5 | Karamin kuskure /MPa | ≥6 | |
Tattalin arziki na aikin gudunmawa
1. Yi sandblast ko shot blast a kan satali zuwa Sa2.5, da karamin gyara na 30-50µm.
2. Mawallidi na amfani shine roller coating ko high-pressure airless spraying. Za a saba da paint zuwa wani yawa mai kyau na solvent (solvent ta masu amfani da mu, amfani da A/B ratio wanda aka bayyana a certificate), za a gurba shi da kyau, kuma za a samu viscosity na 40-60µS. Za a fiye shi da 80-120 mesh sieve kuma za a bari shi ya rufe 30 minutes yayi amfani da shi.
3. Yankin da ke aikace-aikacen ya kamata ya kashe kuma ya faru da oil, dust, rust, da sauransu.
4. A gaba daya na kuma na biyu, kuma na farko ya kamata ya kuma daidai. Ku kara 24 gajeru bayan kuma, kuma kuma na kuma ya kamata ya zama 80µm.
5. Bayan kuma, ku kuma da yawa a lokacin da yawa ta yawa 10°C don 7-10 rana yayi amfani. Lokacin kuma ya kamata ya kara idan lokaci ta yawa ta zama babu 10°C. A lokacin kuma, ku kuma da yawa don kuma kuma don kuma kuma da yawa don kuma kuma da yawa.
Ingantaccen:
1. A lokacin da suka yin kwambo, za a ji kwambo da karamin karamin kwayoyi.
2. Tsanin yadda aka sauya ya kamata ya zama 3°C kafin yadda aka sauya a cikin ruwa, kuma tsinkanin ruwa ba za a iya ziyarci 80%. A wala ta amfani da ita a lokacin yadda aka sauya a ruwa, yadda aka sauya a tsaunin ruwa, ko lokacin da yadda aka sauya ya zama ƙasa da 5°C.
3. Ya haɗa da mahaɗin gaba na epoxy na shirinmu, acrylic polyurethanes, aliphatic polyurethanes, da sauran mahaɗin gaba.
4. Wannan abu ana saukar da shi a cikin karamin karami na 30kg don alaƙa na gaba kuma a cikin karamin karami na 3kg don alaƙa na saba.
Ayyukan ajiye da kudande:
Wani lokaci na ajiye na abun ya kashe 12 watan, a ajiye a wurin yara da fahimtar hanyar rufe, canjin ajiye: 5-30℃. A lokacin kariya, za a jaga canjin yara, rayuwa ta fadada, da yanki. Idan lokacin da aka bayyana ya kammala, zai iya amfani da test na bisa canjin teknikal na baya, idan canjin teknikal ya dace, zai iya amfani da ita kuma.
Koyaushe na karamin kudande:
Wurin aiki ya kamata ya haɗa da fasaha na kudande, kuma maki ya kamata ya sanya kofin mata, kofin kada, mask, da sauran, don kara kuskus da karamin kofin da karamin kofin na karamin kofin. Karamin kafin kafin da karamin kafin suna da kansa mai gaba ce kuma suna da kansa mai zama kafin kafin a wurin aiki.
Bayani:
Bayanin ƙirƙirar wannan abu suna daga tashin laboratari da kuma karfafa a matsayin yadda ake amfani da shi, domin fahimtar hanyar amfani kawai. Maki na amfani zasu iya guro cikin haɗin ƙirƙirar da suka yi amfani da shi don sauyi. Mu ƙunna kuma kuma kula da kwalitas ta teknikal na wannan abu, kuma mu ba da shawara kawai a cikin haɗin ƙirƙirar da suka yi amfani da shi, kuma baza mu zama masu ƙarfi a cikin ƙirƙirar ku ba. Mu da hakkali don sauyin wannan shirin bayanai lokacin da muna sauyin abun da aka bayar.
