EN
Abu na Epoxy High-Build Zinc-Rich da ke ayyana a wani lokaci
Wata farin kuka biyu ta hanyar amfani da epoxy resin, ultrafine zinc powder, thickener, additives, solvent, curing agent, da sauransu.
- Bayani
- Bayanin
- Aiki
- Bayanan
- Tattalin arziki na aikin gudunmawa
- Kayan da aka ba da shawara
Bayani
| Makarantar Gare: | Jiangxi |
| Namun Sharhin: | Qianlang |
| Raiya Namar: | H06-4 |
| Rubutu: | ISO900/ISO14001/ISO45001/CE |
| Kamfanin Duniya Mai Karfe: | 500KG |
| Niyoyar Sai: | USD2.6-2.8 |
| Tafiyar Bayani: | / |
| Watan Aikace: | 30days |
Bayanin
Kwaliya mai kyau ga kariya ta tsanani da kwaliya na fiziki da maimakon gaskiya.
Aiki
Zai iya amfani da shi don bincike na tsanani a cikin da a waje na kofa, kayayyaki, kofa na dandamai, al'adu na gida, tsumbun na yaki, da kofa na saukin yaki.
Bayanan
| Nombarnin ajiye | Test item | Shakara na Al'ada | |
| 1 | Ranar da dabbobi na film | Gurara, ba da karami | |
| 2 | Waktu na kusanci ,(23±2℃)h | Yawan Rana don Ƙarɓon Ƙarƙashin Gidan | ≤1 |
| Kullum waktu na yin gaba | ≤24 | ||
| 2 | Abu mai tsoro, % | ≥75 | |
| 3 | Karamin gudun yin damar, cm | ≥50 | |
| 4 | Karamin kuskure /MPa | ≥6 | |
| 5 | Water resistance (24h) | Babu abin da ya saurare | |
| 6 | Mai tsinkanin gishiri (3% NaCl, 7 rana) | Ba za a samu kari ba, ba za a samu kofa ba | |
Tattalin arziki na aikin gudunmawa
1. Yi sandblast ko shot blast a kan satali zuwa Sa2.5, da karamin gyara na 30-50µm.
2. Mawallidi na aikace-aikacen suka hada: roller coating ko high-pressure airless spraying. Za a sanya abinci zuwa wani karamin solvent (solvent na shirinmu, amma a yi amfani da nisba na A/B ta hanyar shahada), sau kara suka daga cikin karamin, kuma za a sanya viscosity zuwa 40-60µS. Ku fiyadde ta 80-120 mesh sieve, kuma ku bari suka fayyade 20 miniti kafin aikace-aikacen.
3. Yankin da ke aikace-aikacen ya kamata ya kashe kuma ya faru da oil, dust, rust, da sauransu.
4. Kafin aikace-aikacen karshe, karshe na farko ya kamata ya faru da kuma ya dace. Ku biyo 24 sa'at kafin aikace-aikacen karshe, tare da total dry film thickness na ~150µm.
5. Bayan yin fassara, sanya taimako mai kyau a lokacin da fassara ya zama daidai don gudanin fassara daga yin kishin da ruwa.
Ingantaccen:
1. A lokacin da suka yin kwambo, za a ji kwambo da karamin karamin kwayoyi.
2. Tsanin yadda aka sauya ya kamata ya zama 3°C kafin yadda aka sauya a cikin ruwa, kuma tsinkanin ruwa ba za a iya ziyarci 80%. A wala ta amfani da ita a lokacin yadda aka sauya a ruwa, yadda aka sauya a tsaunin ruwa, ko lokacin da yadda aka sauya ya zama ƙasa da 5°C.
3. Ya haɗa da mahaɗin gaba na epoxy na shirinmu, acrylic polyurethanes, aliphatic polyurethanes, da sauran mahaɗin gaba.
4. Wannan abu ana sauya shi a karama na 35kg na hanyar iron drum don mahaɗin gaba, kuma 3.5kg na hanyar iron drum don mahaɗin gaba.
Ayyukan ajiye da kudande:
Wani lokaci na ajiye na abun ya kashe 12 watan, a ajiye a wurin yara da fahimtar hanyar rufe, canjin ajiye: 5-30℃. A lokacin kariya, za a jaga canjin yara, rayuwa ta fadada, da yanki. Idan lokacin da aka bayyana ya kammala, zai iya amfani da test na bisa canjin teknikal na baya, idan canjin teknikal ya dace, zai iya amfani da ita kuma.
Koyaushe na karamin kudande:
Wurin aiki ya kamata ya haɗa da fasaha na kudande, kuma maki ya kamata ya sanya kofin mata, kofin kada, mask, da sauran, don kara kuskus da karamin kofin da karamin kofin na karamin kofin. Karamin kafin kafin da karamin kafin suna da kansa mai gaba ce kuma suna da kansa mai zama kafin kafin a wurin aiki.
Bayani:
Bayanin ƙirƙirar wannan abu suna daga tashin laboratari da kuma karfafa a matsayin yadda ake amfani da shi, domin fahimtar hanyar amfani kawai. Maki na amfani zasu iya guro cikin haɗin ƙirƙirar da suka yi amfani da shi don sauyi. Mu ƙunna kuma kuma kula da kwalitas ta teknikal na wannan abu, kuma mu ba da shawara kawai a cikin haɗin ƙirƙirar da suka yi amfani da shi, kuma baza mu zama masu ƙarfi a cikin ƙirƙirar ku ba. Mu da hakkali don sauyin wannan shirin bayanai lokacin da muna sauyin abun da aka bayar.
